Base Mod for using Mods with Pallet Autoload Specialization
An example of how to use in your own mod you will find in the Strautmann SEK 802 Pallet Autoload.
Currently supported from the standard game:
– Standard Euro pallets
– Liquid tanks
– Big bag pallets
– Round bales
– Square bales 180/220/240
– Bigbags
Pallets from the following mods can be used:
– Package Of Premium Pallets And Bags
– HoT Fries Factory
In addition, all Euro pallets that are constructed according to the principle of the basic play pallets.
Operation:
Activate loading with [B] and then drive next to a pallet or bale to load it.
Make sure that you have selected the correct load.
The pallets or bales will then lie on the loading area as if they were loaded by hand.
Do not forget to fasten the straps, otherwise they will slip.
You can select the unloading side with [U] and unload with [I].
The loading switches off automatically when there is no more loading area.
You can also switch it off yourself with [B].
Changelog:
1.3.1.0
– Changes to Mod Image and Description for the ModHub publish
– Added ES
– Loading and Unloading Areas can be shown now. Default [LCTRL] + [U]
– Loading is only shown in F1 when there is something to load, to not block Truck refill diesel
– Controls are only visible when the Trailer is active to solve problems with mutiple autloaders attached
1.5.0.0
– Add default round bales 125/150/180. Must be enabled by the modder of the trailer (useBales=”true”)
– Size of liquid tank corrected for better loading
– Icons for modder added in mod
– Translation in CZ
– Bigbags added
– Translations improved
– Tension belts automatically tightened. Must be activated by the trailer modder (useTensionBelts=”true”)
– Bale loading in motion improved
– Support of mod “Package of Premium Pallets and Sacks”.
– Support of mod “HoT Pommes Factory”
– Added square bales 180/220/240
1.6.0.0
– Modification of the communication with the Dedi Server to improve the performance.
– Loading mode now remains active until the trailer is full or it is switched off. Tension belts are tightened in between if the trailer supports it.
– Vehicle scheme shows when loading is activated.
– Maximum capacity displayed when load selection is made.
– Automatic tensioning straps deactivated on Dedi Server because of the bug from patch 1.3.
1.6.1.0
– Possibility for external mods to access the functions created
– Selected cargo is now displayed as extra text in the help menu
– Palette sizes adapted to average values of new mods
– Automatic ratchet straps re-enabled on Dedi Server.
Automatic ratchet straps re-enabled on Dedi Server. Until Giants has patched this mod is necessary.
– Modders can now also make their own palettes loadable through the folder structure. Details on the wiki.
1.6.1.2
– Fix for Wool pallet
1.6.2.0
– External access optimised
– Square bale loading behaviour optimised
1.7.0.0
– Changed activation to LS standard for loading wagon [B] and always activatable.
– Text of unloading page in F1 on Dedi fixed.
– Support of Multifruit Pack bales incl. lavender round bales (loadable as cotton round bales)
– Load only selectable when load mode is deactivated
– Automatic tightening straps on dedicated server disabled due to engine sync errors
1.7.1.0
– Automatic tension belts on dedi server activated again regarding the settings the modder of the vehicle has defined.
– Automatic tension belts can now be activated/deactivated per vehicle by [lctrl]+[J]. This is stored per vehicle.
– Optimized searching valid load place by remembering invalid load places as long as the loader is active.
– add unloading side backwards for all vehicles by default. Position can configured by the modder.
– Changed priorities of the key binding to have important entries better visible in the F1 Help.
Loading...
